Specifications

6–5
Compaq HSG80 Array Controller ACS Version 8.4 Configuration and CLI Reference Guide
2. DEVICE_CODE_LOAD_DISK
3. DEVICE_CODE_LOAD_TAPE
ENTER FUNCTION NUMBER (0:3) [0] ? 1
UNATTACHED DEVICES ON THIS CONTROLLER INCLUDE:
DEVICE SCSI PRODUCT ID CURRENT DEVICE REV
DISK10000 RZ26 (C) DEC T386
DISK20000 RZ26 (C) DEC T386
DISK20100 RZ29B (C) DEC 0006
DISK30100 RZ25 (C) DEC 0900
DISK30200 RZ26L (C) DEC X442
ENTER A DEVICE TO FORMAT ? DISK10000
FORMAT DISK10000 MAY TAKE UP TO 40 MINUTES TO FORMAT
SELECT ANOTHER DEVICE (Y/N) [N] Y
ENTER A DEVICE TO FORMAT ? DISK20000
FORMAT DISK20000 MAY TAKE UP TO 35 MINUTES TO FORMAT
SELECT ANOTHER DEVICE (Y/N) [N] Y
ENTER A DEVICE TO FORMAT ? DISK20100
FORMAT DISK20100 MAY TAKE UP TO 15 MINUTES TO FORMAT
SELECT ANOTHER DEVICE (Y/N) [N] N
^Y AND ^C WILL BE DISABLED WHILE THE FORMAT OPERATION IS IN PROGRESS.
CAUTION:
WHEN YOU FORMAT A DEVICE, IT WILL DESTROY THE DATA ON
THE DEVICE. A BACKUP OF THE DEVICE SHOULD HAVE BEEN
DONE IF THE DATA IS IMPORTANT.
NOTE:
IN ORDER TO MINIMIZE THE POSSIBILITY OF A SCSI BUS
RESET, IT IS RECOMMENDED THAT YOU PREVENT NON-HSUTIL IO
OPERATIONS TO ALL OTHER DEVICES ON THE SAME PORT AS THE
DESTINATION DEVICE(S). IF A SCSI BUS RESET OCCURS, THE
FORMAT MAY BE INCOMPLETE AND YOU MAY HAVE TO RE-INVOKE
HSUTIL.
AFTER YOU ANSWER THE NEXT QUESTION, THE FORMAT WILL START. DO YOU WANT
TO CONTINUE (Y/N) [N] ? Y
HSUTIL STARTED AT: 14-JAN-1997 15:00:31
FORMAT OF DISK10000 FINISHED AT 14-JAN-1997 15:25:12
FORMAT OF DISK20000 FINISHED AT 14-JAN-1997 15:30:31
FORMAT OF DISK20100 FINISHED AT 14-JAN-1997 15:30:43
HSUTIL - NORMAL TERMINATION AT 14-JAN-1997 15:31:09