Specifications

5–26 Configuring an HSG80 Array Controller
7. Turn on the subsystem.
Some operating systems may require you to start the host to see the devices
attached to the new controller. See the HSG80 Array Controller ACS Version 8.X
Release Notes for your operating system.
Figure 5–7. Example Cabling in Multiple-Bus Failover: Configuration 2
CXO6872A
1
2
6
6
4
3
5
5
Table 5–6. Key to Figure 5–7 Example Cabling in Multiple-Bus Failover: Configuration 2
Item Description
➀
HSG80 controller A
➁
HSG80 controller B
➂
Host port 1 (active) connection from controller A to switch port 0
Host port 1 (active) connection from controller B to switch port 0
➃
Host port 2 (active) connection from controller A to switch port 2
Host port 2 (active) connection from controller B to switch port 2
➄
Host bus connections to the host adapters
➅
Switches