Specifications

5–23
Compaq HSG80 Array Controller ACS Version 8.4 Configuration and CLI Reference Guide
Connecting in Multiple-Bus Failover Mode to
the Hosts
IMPORTANT: If you are using HSG80 ACS V8.4P code, see the Data Replication
Manager HSG80 ACS Version 8.4P Guide to Operations
for cabling yourcontroller
into the subsystem.
You can connect each controller pair to your hosts with two switches.
Using Two Switches
Follow the procedures below to properly connect your dual-redundant controllers to
your host. Figure 5–6 and Figure 5–7 illustrate two different choices on how your set-
up should appear.