Specifications

4–23
Compaq HSG80 Array Controller ACS Version 8.4 Configuration and CLI Reference Guide
3. When prompted, enter the unit number of the unit you want to clone.
4. When prompted, enter a unit number for the clone unit that CLONE will create.
5. When prompted, indicate how you would like the clone unit to be brought online:
either automatically or only after your approval.
6. When prompted, enter the disk drives you want to use for the clone units.
7. Back up the clone unit.
The following example shows the commands you would use to clone storage unit
D204. The clone command terminates after it creates storage unit D205, a clone or
copy of D204.
RUN CLONE
CLONE LOCAL PROGRAM INVOKED
UNITS AVAILABLE FOR CLONING:101
204
Enter unit to clone ? 204
CLONE WILL CREATE A NEW UNIT WHICH IS A COPY OF UNIT 204.
Enter the unit number which you want assigned to the new unit ? 205
THE NEW UNIT MAY BE ADDED USING ONE OF THE FOLLOWING METHODS:
1. CLONE WILL PAUSE AFTER ALL MEMBERS HAVE BEEN COPIED. THE USER MUST
THEN PRESS RETURN TO CAUSE THE NEW UNIT TO BE ADDED.
2. AFTER ALL MEMBERS HAVE BEEN COPIED, THE UNIT WILL BE ADDED
AUTOMATICALLY.
Under which above method should the new unit be added[]?1
DEVICES AVAILABLE FOR CLONE TARGETS:
DISK20200 (SIZE=832317)
DISK20400 (SIZE=832317)
DISK30100 (SIZE=832317)
Use available device DISK20200(size=832317) for member