Specifications

3–8 Compaq StorageWorks HSG80 Array Controller ACS Version 8.5 Maintenance and Service Guide
9. For dual-redundant controller configurations, repeat step 2 through step 8 for the
second controller.
Deleting a Software Patch
Use the following steps to delete a software patch:
1. From a host console, quiesce all port activity.
2. Connect a PC or terminal to the controller maintenance port.
3. Start CLCP with the following command:
RUN CLCP
The following menu appears:
Select an option from the following list:
Code Load & Patch local program Main Menu
0: Exit
1: Enter Code LOAD local program
2: Enter Code PATCH local program
3: Enter EMU Code LOAD utility
Enter option number (0..3) [0] ?
4. Enter option 2. The following menu appears:
You have selected the Code Patch local program. This program is used to
manage software code patches. Select an option from the following list:
Type ^Y or ^C (then RETURN) at any time to abort Code Patch.
Code Patch Main Menu
0: Exit
1: Enter a Patch
2: Delete Patches
3: List Patches
Enter option number (0..3) [0] ?
5. Enter option 2. The following display appears:
This is the Delete Patches option. The program prompts you for the
software version and patch number you wish to delete. If you select a
patch for deletion that is required for another patch, all dependent