Specifications

3–2 Compaq StorageWorks HSG80 Array Controller ACS Version 8.5 Maintenance and Service Guide
Upgrading Controller Software
Upgrade controller software using one of two ways:
■ Install a new program card (see Figure 3–1) that contains the new software.
■ Download a new software image, and use the menu-driven Code Load/Code Patch
(CLCP) utility to write it onto the existing program card. Use this utility to also install,
delete, and list patches to the controller software.
Figure 3–1. Program (PCMCIA) card
Installing a New Program Card
Use the following steps and Figure 3–1 to install a program (PCMCIA) card that contains
the new software. If only upgrading the software in a single-controller configuration,
disregard references to the “other controller.”
To upgrade the software by installing a new program card:
1. From the host console, dismount the storage units in the subsystem.
2. Connect a PC or terminal to the maintenance port of one of the controllers in the
subsystem.
3. Shut down the controllers.
CXO6578B
4
5
1 2 3 4 5 6
2
3
1
Controller
Program card slot
Program card ejection button
Program (PCMCIA) card
Program card ESD cover