Specifications

2–54 Compaq StorageWorks HSG80 Array Controller ACS Version 8.5 Maintenance and Service Guide
1. If replacing a cable, connect the replacement cable into the ports previously used by
the old cable.
If replacing a switch or hub, reconnect all cables removed from the old switch or hub.
2. Restart each controller by pressing its reset button.
The controllers automatically restart and the subsystem is now ready for operation.
3. Restart the host system using host documentation.
Replacing a Program Card
Use the following steps to replace a program (personal computer memory card industry
association—PCMCIA) card (see Figure 2–16):
Figure 2–16. Program (PCMCIA) cardlocation and components
CAUTION: The replacement program card must have the same software version as
the original program card being replaced. See Chapter 3 for more information.
1. From a host console, stop all host activity and dismount the logical units in the
subsystem. If using a Windows NT platform, shut down the server.
2. Connect a PC or terminal to a controller maintenance port.
CXO6578B
4
5
1 2 3 4 5 6
2
3
1
Controller
Program card slot
Program card ejection button
Program (PCMCIA) card
Program card ESD cover