Specifications

2–40 Compaq StorageWorks HSG80 Array Controller ACS Version 8.5 Maintenance and Service Guide
Replacing a GLM
Use the following steps in “Removing a GLM” and “Installing a GLM” to replace a GLM
in a controller. Figure 2–11 shows the location and orientation of the GLMs.
Figure 2–11. Location of GLMs inside a controller
CAUTION: ESD can easily damage a controller and GLM. Wear a snug-fitting,
grounded ESD wrist strap.
Access door
Port 1 GLM
Release lever
Locking tab
Guide holes
GLM connector
Port 2 GLM
CXO6245C
2
3
4
5
6
7
1