Specifications

5–84 Compaq StorageWorks HSG80 Array Controller ACS Version 8.5 Maintenance and Service Guide

44892091 Host Port Hardware diagnostic field at system initialization.

■ Last Failure Parameter [0] contains failed port number.

448B0100 Host Port Transport software layer unable to allocate work item for updating NV memory

during LOGI.

448C0100 Host Port Transport software layer unable to allocate work item for LOGI completion routine. 01

448D0100 Host port transport software layer ran out of temporary HCBs. 01

448E0100 Host Port Transport software layer unable to allocate memory for quick FC responses. 01

448F0100 Host Port Transport software layer unable to allocate memory for quick responses. 01

44900100 Host Port Transport software layer unable to allocate memory for HCBs. 01

44910100 Host Port Transport software layer unable to allocate memory for HTB TACHYON header. 01

44920101 An invalid work item was detected on abort pending work queue.

■ Last Failure Parameter [0] contains invalid work type.

44930100 Unable to allocate enough Peer to Peer Remote Copy TACHYON headers for Fibre Channel

Host Port Transport software layer.

44940100 Host Port Transport software layer detected an error during buffer-to-buffer credit check. 01

44950100 Host Port Transport software layer unable to acquire an FC quick response resource. 01

44960101 An invalid work item was detected on work pending queue.

■ Last Failure Parameter [0] contains invalid work type.

44970100 Host Port Transport software layer unable to access TACHYON register. 01

449A0101 An invalid work item was detected on abort pending work queue.

■ Last Failure Parameter [0] contains work type.

64000100 Insufficient buffer memory to allocate data structures needed to propagate SCSI Mode Select

changes to other controller.

64010100 During an initialization of LUN specific mode pages, an unexpected device type was

encountered.

Table 5–18 Last Failure Codes (Sheet 38 of 41)

Code Description

Repair

Action

Code