Specifications

Event Reporting: Templates and Codes 5–77
OB0B0100 Unable to find any unused partition group. With 128 available, we should be able to find at
least one.
01
OB0C0100 Unable to allocate memory to use for communication with the DT manager. 01
0D000011 The EMU firmware returned a bad status when told to poweroff.
■ Last Failure Parameter [0] contains the value of the bad status.
00
0E000100 VA$ENABLE_NOTIFICATION failed with insufficient resources at controller initialization time. 01
0E010102 An invalid status was returned from CACHE$LOCK_READ during a remote copy.
■ Last Failure Parameter [0] contains the DD address.
■ Last Failure Parameter [1] contains the invalid status.
01
0E020100 Unable to allocate memory for the Fault Management Event Information Packet used in
generating error logs to the host.
01
0E030100
0E040100
0E050100
0E060100
Unable to allocate memory for a Failover Control Block. 01
0E096980 This controller has detected a failed link during the heartbeat to a remote target. The other
controller has a good link to the remote target. In order to resume operations to that remote
target, this controller is restarted to failover the initiator unit to the other controller.
69
0E0A6980 A remote copy write has failed all recovery attempts on this controller. As part of further error
recovery, this controller is restarted, to force the initiator unit over to the other controller so
the remote copy can be retried.
69
0E0B6980 This controller has detected a failed link upon dual controllers restarting. The other controller
has a good link to the remote target. In order to resume operations to that remote target, this
controller is restarted to failover the initiator unit to the other controller.
69
0E0C0101 Unrecognized request to perform WHL operation on other controller.
■ Last Failure Parameter [0] contains operation request.
01
0E0D0101 Unrecognized WHL operation ID received from other controller.
■ Last Failure Parameter [0] contains operation ID.
01
0E0E0101 An illegal failover request was given to the Write History Log request handler.
■ Last Failure Parameter [0] contains failover request.
01
Table 5–18 Last Failure Codes (Sheet 31 of 41)
Code Description
Repair
Action
Code