Specifications

5–74 Compaq StorageWorks HSG80 Array Controller ACS Version 8.5 Maintenance and Service Guide
09670101 Local FLM detected an invalid facility to act upon.
■ Last Failure Parameter [0] contains the faciltiy found.
01
09680101 Remote FLM detected an error and requested the local controller to restart.
■ Last Failure Parameter [0] contains the reason for the request.
01
09C80101 Remote FLM detected an invalid facility to act upon.
■ Last Failure Parameter [0] contains the facility found.
01
09C90101
09CA0101
Remote FLM detected an invalid work type.
■ Last Failure Parameter [0] contains the work type found.
01
09CB0012 Remote FLM detected that the other controller has a facility lock manager at an incompatible
revision level with this controller.
■ Last Failure Parameter [0] contains the controller’s FLM revision.
■ Last Failure Parameter [1] contains the other controller’s FLM revision.
00
0A020100 ILF$CACHE_READY unable to allocate necessary DWDs. 01
0A030100 ILF$CACHE_READY buffers_obtained > non-zero stack entry count. 01
0A040100 ILF$CACHE_READY DWD overrun. 01
0A050100 ILF$CACHE_READY DWD underrun. 01
0A060100 ILF$CACHE_READY found buffer marked for other controller. 01
0A070100 CACHE$FIND_LOG_BUFFERS returned continuation handle > 0. 01
0A080100 Not processing a bugcheck. 01
0A090100 No active DWD. 01
0A0A0100 Current entry pointer is not properly aligned. 01
0A0B0100 Next entry pointer is not properly aligned. 01
0A0E0100 Active DWD is not a DISK WRITE DWD as expected. 01
0A0F0100 New active DWD is not a DISK WRITE DWD as expected. 01
0A100100
0A120100
0A130100
Data buffer pointer is not properly aligned. 01
0A140100 New entry pointer is not properly aligned. 01
0A150100 New entry record type is out of range. 01
Table 5–18 Last Failure Codes (Sheet 28 of 41)
Code Description
Repair
Action
Code