Specifications
Event Reporting: Templates and Codes 5–73
08100101 A call to NVFOC$TRANSACTION had a from field (id) that was out of range for the NVFOC
communication utility.
■ Last Failure Parameter [0] contains the bad id value.
01
08110101 NVFOC tried to defer more than one FOC send.
■ Last Failure Parameter[0] contains the master ID of the connection that had the multiple
delays.
01
08140100 Could not allocate memory to build a workblock to queue to the NVFOC thread. 01
08160100 A request to clear the remote configuration was received but the memory was not locked. 01
08170100 A request to read the next configuration was received but the memory was not locked. 01
08180100 Could not get enough memory for FLS FCBs to receive information from the other controller. 01
08190100 An unlock command was received when the NV memory was not locked. 01
081A0100 Unable to allocate memory for remote work. 01
081B0101 Bad remote work received on remote work queue.
■ Last Failure Parameter[0] contains the id type value that was received on the NVFOC
remote work queue.
01
081C0101 Bad member management work received.
■ Last Failure Parameter[0] contains the bad member management value that was
detected.
01
081D0000
081E0000
In order to go into
mirrored
cache mode, the controllers must be restarted.
Applies to
nonmirrored
.
00
081F0000 An FLM$INSUFFICIENT_RESOURCES error was returned from a FLM lock or unlock call. 00
08200000 Expected restart so the write_instance may recover from a configuration mismatch. 00
08210100 Unable to allocate memory to setup NVFOC lock/unlock notification routines. 01
09010100 Unable to acquire memory to initialize the FLM structures. 01
09640101 Work that was not FLM work was found on the FLM queue. Bad format is detected or the
formatted string overflows the output buffer.
■ Last Failure Parameter [0] contains the work found.
01
09650101 Work that was not FLM work was found on the FLM queue.
■ Last Failure Parameter [0] contains the structure found.
01
Table 5–18 Last Failure Codes (Sheet 27 of 41)
Code Description
Repair
Action
Code