Specifications

5–70 Compaq StorageWorks HSG80 Array Controller ACS Version 8.5 Maintenance and Service Guide
04040103 The event log format found in V_fm_template_table is not supported by the Fault Manager.
The bad format was discovered while trying to fill in a supplied Event Information Packet
(EIP).
Last Failure Parameter[0] contains the instance code value.
Last Failure Parameter[1] contains the format code value.
Last Failure Parameter[2] contains the requester error table index value.
01
04050100 The Fault Manager could not allocate memory for its Event Information Packet (EIP) buffers. 01
040A0100 The caller of FM$CANCEL_SCSI_DE_NOTIFICATION passed an address of a deferred error
notification routine which doesn’t match the address of any routines for which deferred error
notification is enabled.
01
040E0100 FM$ENABLE_DE_NOTIFICATION was called to enable deferred error notification but the
specified routine was already enabled to receive deferred error notification.
01
040F0102 The eip->generic.mscp1.flgs field of the EIP passed to FM$REPORT_EVENT contains an
invalid flag.
Last Failure Parameter[0] contains the instance code value.
Last Failure Parameter[1] contains the value supplied in the eip->generic.mscp1.flgs
field.
01
04100101 Unexpected template type found during fmu_display_errlog processing.
Last Failure Parameter[0] contains the unexpected template value.
01
04110101 Unexpected instance code found during fmu_memerr_report processing.
Last Failure Parameter[0] contains the unexpected instance code value.
01
04120101 CLIB$SDD_FAO call failed.
Last Failure Parameter[0] contains the failure status code value.
01
04140103 The template value found in the eip is not supported by the Fault Manager. The bad template
value was discovered while trying to build an esd.
Last Failure Parameter [0] contains the instance code value.
Last Failure Parameter [1] contains the template code value.
Last Failure Parameter [2] contains the requester error table index value.
01
Table 5–18 Last Failure Codes (Sheet 24 of 41)
Code Description
Repair
Action
Code