Specifications
5–66 Compaq StorageWorks HSG80 Array Controller ACS Version 8.5 Maintenance and Service Guide
033F0108 An EDC error was detected on a read of a soft-sectored device path not yet implemented.
■ Last Failure Parameter [0] contains the PCB port_ptr value.
■ Last Failure Parameter [1] contains the PCB copy of the device port TEMP register.
■ Last Failure Parameter [2] contains the PCB copy of the device port DBC register.
■ Last Failure Parameter [3] contains the PCB copy of the device port DNAD register.
■ Last Failure Parameter [4] contains the PCB copy of the device port DSP register.
■ Last Failure Parameter [5] contains the PCB copy of the device port DSPS register.
■ Last Failure Parameter [6] contains the PCB copies of the device port
SSTAT2/SSTAT1/SSTAT0/DSTAT registers.
■ Last Failure Parameter [7] contains the PCB copies of the device port
LCRC/RESERVED/ISTAT/DFIFO registers.
01
03410101 Invalid SCSI device type in PUB.
■ Last Failure Parameter [0] contains the PUB SCSI device type.
01
03450188 A Master Data Parity Error was detected by a port.
■ Last Failure Parameter [0] contains the PCB port_ptr value.
■ Last Failure Parameter [1] contains the PCB copies of the device port DCMD/DBC
registers.
■ Last Failure Parameter [2] contains the PCB copy of the device port DNAD register.
■ Last Failure Parameter [3] contains the PCB copy of the device port DSP register.
■ Last Failure Parameter [4] contains the PCB copy of the device port DSPS register.
■ Last Failure Parameter [5] contains the PCB copies of the device port
DSTAT/SSTAT0/SSTAT1/SSTAT2 registers.
■ Last Failure Parameter [6] contains the PCB copies of the device port
DFIFO/ISTAT/SBCL/RESERVED registers.
■ Last Failure Parameter [7] contains the PCB copies of the device port
SIST0/SIST1/SXFER/SCNTL3 registers.
01
03470100 Insufficient memory available for target block allocation. 01
03480100 Insufficient memory available for device port info block allocation. 01
03490100 Insufficient memory available for autoconfig buffer allocation. 01
034A0100 Insufficient memory available for PUB allocation. 01
Table 5–18 Last Failure Codes (Sheet 20 of 41)
Code Description
Repair
Action
Code