Specifications

Event Reporting: Templates and Codes 5–63

030B0188 A dip error was detected when pcb_busy was set.

■ Last Failure Parameter [0] contains the PCB port_ptr value.

■ Last Failure Parameter [1] contains the new info NULL-SSTAT0-DSTAT-ISTAT.

■ Last Failure Parameter [2] contains the PCB copy of the device port DBC register.

■ Last Failure Parameter [3] contains the PCB copy of the device port DNAD register.

■ Last Failure Parameter [4] contains the PCB copy of the device port DSP register.

■ Last Failure Parameter [5] contains the PCB copy of the device port DSPS register.

■ Last Failure Parameter [6] contains the PCB copies of the device port

SSTAT2/SSTAT1/SSTAT0/DSTAT registers.

■ Last Failure Parameter [7] contains the PCB copies of the device port

LCRC/RESERVED/ISTAT/DFIFO registers.

031E0100 Can’t find in_error dwd on in-process queue. 01

031F0100 Either DWD_ptr is null or bad value in dsps. 01

03280100 SCSI CDB contains an invalid group code for a transfer command. 01

03290100 The required Error Information Packet (EIP) or Device Work Descriptor (DWD) were not

supplied to the Device Services error logging code.

032B0100 A Device Work Descriptor (DWD) was supplied with a NULL Physical Unit Block (PUB) pointer. 01

03320101 An invalid code was passed to the error recovery thread in the error_stat field of the PCB.

■ Last Failure Parameter[0] contains the PCB error_stat code.

03330188 A parity error was detected by a device port while sending data out onto the SCSI bus.

■ Last Failure Parameter [0] contains the PCB port_ptr value.

■ Last Failure Parameter [1] contains the PCB copy of the device port TEMP register.

■ Last Failure Parameter [2] contains the PCB copy of the device port DBC register.

■ Last Failure Parameter [3] contains the PCB copy of the device port DNAD register.

■ Last Failure Parameter [4] contains the PCB copy of the device port DSP register.

■ Last Failure Parameter [5] contains the PCB copy of the device port DSPS register.

■ Last Failure Parameter [6] contains the PCB copies of the device port

SSTAT2/SSTAT1/SSTAT0/DSTAT registers.

■ Last Failure Parameter [7] contains the PCB copies of the device port

LCRC/RESERVED/ISTAT/DFIFO registers.

Table 5–18 Last Failure Codes (Sheet 17 of 41)

Code Description

Repair

Action

Code