Specifications
5–58 Compaq StorageWorks HSG80 Array Controller ACS Version 8.5 Maintenance and Service Guide
02BF0100 Report_error routine encountered an unexpected failure status returned from
DIAG$LOCK_AND_TEST_CACHE_B.
01
02C00100 Copy_buff_on_this routine expected the given page to be marked bad and it wasn’t. 01
02C10100 Copy_buff_on_other routine expected the given page to be marked bad and it wasn’t. 01
02C30100 CACHE$CREATE_MIRROR was invoked by C_SWAP under unexpected conditions
(e.g., other controller not dead, bad lock state).
01
02C60100 Mirroring transfer found CLD with writeback state OFF. 01
02C70100
02C80100
Bad BBR offsets for active shadowset, detected on
write
.
Applies to
read
.
01
02C90100 Illegal call made to CACHE$PURGE_META when the storageset was not quiesced. 01
02CA0100 Illegal call made to VA$RAID5_META_READ when another read (of metadata) is already in
progress on the same strip.
01
02CB0000 A restore of the configuration has been done. This cleans up and restarts with the new
configuration.
00
02CC0100 On an attempt, which is not allowed to fail, to allocate a cache node, no freeable cache node
was found.
01
02D00100 Not all alter_device requests from VA_SAVE_CONFIG completed within the timeout interval. 01
02D30100 The controller has insufficient memory to allocate enough data structures used to manage
metadata operations.
01
02D60100 An invalid storage set type was specified for metadata initialization. 01
02D90100 Bad CLD pointer passed setwb routine. 01
02DA0100 A fatal logic error occurred while trying to restart a stalled data transfer stream. 01
02DB0100
02DC0100
A call to EXEC$ALLOCATE_MEM_ZEROED failed to return memory when populating the
disk
read
PCX DWD stack.
Applies to
disk write
.
01
02DD0101 The VA state change deadman timer expired, and at least one VSI was still interlocked.
■ Last Failure Parameter [0] contains the nv_index.
01
02DE0100 An attempt to allocate memory for a null pub failed to get the memory. 01
02DF0101 License identified in Last Failure Parameter [0] was not forced valid. 01
02E00180 Mirror functionality is broken. 01
Table 5–18 Last Failure Codes (Sheet 12 of 41)
Code Description
Repair
Action
Code