Specifications

Event Reporting: Templates and Codes 5–55
023A2084 A processor interrupt was generated by the controller’s XOR engine (FX), indicating an
unrecoverable error condition.
■ Last Failure Parameter [0] contains the FX Control and Status Register (CSR).
■ Last Failure Parameter [1] contains the FX DMA Indirect List Pointer register (DILP).
■ Last Failure Parameter [2] contains the FX DMA Page Address register (DADDR).
■ Last Failure Parameter [3] contains the FX DMA Command and control register (DCMD).
20
02440100 The logical unit mapping type was detected invalid in va_set_disk_geometry( ). 01
02530102
02560102
An invalid status was returned from CACHE$LOOKUP_LOCK( ).
■ Last Failure Parameter[0] contains the DD address.
■ Last Failure Parameter[1] contains the invalid status.
01
02570102 An invalid status was returned from VA$XFER( ) during an operation.
■ Last Failure Parameter[0] contains the DD address.
■ Last Failure Parameter[1] contains the invalid status.
01
025A0102 An invalid status was returned from CACHE$LOOKUP_LOCK( ).
■ Last Failure Parameter[0] contains the DD address.
■ Last Failure Parameter[1] contains the invalid status.
01
02690102 An invalid status was returned from CACHE$OFFER_WRITE_DATA( ).
■ Last Failure Parameter[0] contains the DD address.
■ Last Failure Parameter[1] contains the invalid status.
01
027B0102 An invalid status was returned from VA$XFER( ) in a complex ACCESS operation.
■ Last Failure Parameter[0] contains the DD address.
■ Last Failure Parameter[1] contains the invalid status.
01
027D0100
027E0100
027F0100
02800100
Unable to allocate memory for a Failover Control Block. 01
02840100 Unable to allocate memory for the XNode Array. 01
02860100 Unable to allocate memory for the Fault Management Event Information Packet used by the
Cache Manager in generating error logs to the host.
01
02880100 Invalid FOC Message in cmfoc_snd_cmd. 01
Table 5–18 Last Failure Codes (Sheet 9 of 41)
Code Description
Repair
Action
Code