Specifications

5–54 Compaq StorageWorks HSG80 Array Controller ACS Version 8.5 Maintenance and Service Guide
019A2093 Hardware Port Hardware failure - TACHYON.
■ Last Failure Parameter [0] contains failed port number.
■ Last Failure Parameter [1] contains gluon status.
■ Last Failure Parameter [2] contains TACHYON status.
20
02010100 Initialization code was unable to allocate enough memory to set up the send data
descriptors.
01
02040100 Unable to allocate memory necessary for data buffers. 01
02050100 Unable to allocate memory for the Free Buffer Array. 01
02080100
02090100
020C0100
A call to EXEC$ALLOCATE_MEM_ZEROED failed to return memory when populating the
disk
read
DWD stack.
Applies to
disk write .
Applies to
miscellaneous .
01
02100100 A call to EXEC$ALLOCATE_MEM_ZEROED failed to return memory when creating the device
services state table.
01
02170100 Unable to allocate memory for the Free Node Array. 01
021D0100 Unable to allocate memory for the Free Buffer Array. 01
021F0100 Unable to allocate memory for WARPs and RMDs. 01
02210100 Invalid parameters in CACHE$OFFER_META call. 01
02220100 No buffer found for CACHE$MARK_META_DIRTY call. 01
02270104 A callback from DS on a transfer request has returned a bad or illegal DWD status.
■ Last Failure Parameter [0] contains the DWD Status.
■ Last Failure Parameter [1] contains the DWD address.
■ Last Failure Parameter [2] contains the PUB address.
■ Last Failure Parameter [3] contains the Device Port.
01
022C0100
022D0100
A
READ_LONG operation was requested for a Local Buffer Transfer. READ_LONG is not
supported for Local Buffer Transfers.
Applies to
WRITE_LONG .
01
02380102 An invalid status was returned from CACHE$LOCK_READ( ).
■ Last Failure Parameter [0] contains the DD address.
■ Last Failure Parameter [1] contains the invalid status.
01
Table 5–18 Last Failure Codes (Sheet 8 of 41)
Code Description
Repair
Action
Code