Specifications

Event Reporting: Templates and Codes 5–49
01140102 DEBUG, ASSUME, or ASSUME_LE macro executed.
■ Last Failure Parameter [0] contains the address of the module name where the macro is
located.
■ Last Failure Parameter [1] contains the line number within the module where the macro
is located. The high order byte of this value identifies the macro type: 0 = DEBUG,
1 = ASSUME, 2 = ASSUME_LE.
01
01150106 A bugcheck occurred before subsystem initialization completed.
■ Last Failure Parameter [0] contains the executive flags value.
■ Last Failure Parameter [1] contains the RIP from the bugcheck call stack.
■ Last Failure Parameter [2] contains the first SIP last failure parameter value.
■ Last Failure Parameter [3] contains the second SIP last failure parameter value.
■ Last Failure Parameter [4] contains the SIP last failure code value.
■ Last Failure Parameter [5] contains the EXEC$BUGCHECK call last failure code value.
01
01170108 The I960 reported a machine fault (parity error) while an NMI was being processed.
■ Last Failure Parameter [0] contains the RESERVED value.
■ Last Failure Parameter [1] contains the access type value.
■ Last Failure Parameter [2] contains the access address value.
■ Last Failure Parameter [3] contains the number of faults value.
■ Last Failure Parameter [4] contains the PC value.
■ Last Failure Parameter [5] contains the AC value.
■ Last Failure Parameter [6] contains the fault type and subtype values.
■ Last Failure Parameter [7] contains the RIP value.
01
01180105 A machine fault (parity error) occurred during EXEC$BUGCHECK processing.
■ Last Failure Parameter [0] contains the executive flags value.
■ Last Failure Parameter [1] contains the RIP from the machine fault stack.
■ Last Failure Parameter [2] contains the read diagnostic register 0 value.
■ Last Failure Parameter [3] contains the FX Chip CSR value.
■ Last Failure Parameter [4] contains the SIP last failure code value.
01
Table 5–18 Last Failure Codes (Sheet 3 of 41)
Code Description
Repair
Action
Code