Specifications

5–42 Compaq StorageWorks HSG80 Array Controller ACS Version 8.5 Maintenance and Service Guide
0C203E02 The Quadrant 0 Memory Controller (CACHEA0) detected a Data Parity error. 14 3E
0C213E02 The Quadrant 1 Memory Controller (CACHEA1) detected a Data Parity error. 14 3E
0C223E02 The Quadrant 2 Memory Controller (CACHEB0) detected a Data Parity error. 14 3E
0C233E02 The Quadrant 3 Memory Controller (CACHEB1) detected a Data Parity error. 14 3E
0C303F02 The Quadrant 0 Memory Controller (CACHEA0) detected a Multibit ECC error. 14 3F
0C313F02 The Quadrant 1 Memory Controller (CACHEA1) detected a Multibit ECC error. 14 3F
0C323F02 The Quadrant 2 Memory Controller (CACHEB0) detected a Multibit ECC error. 14 3F
0C333F02 The Quadrant 3 Memory Controller (CACHEB1) detected a Multibit ECC error. 14 3F
0C403E02 The Quadrant 0 Memory Controller (CACHEA0) detected a Firewall error. 14 3E
0C413E02 The Quadrant 1 Memory Controller (CACHEA1) detected a Firewall error. 14 3E
0C423E02 The Quadrant 2 Memory Controller (CACHEB0) detected a Firewall error. 14 3E
0C433E02 The Quadrant 3 Memory Controller (CACHEB1) detected a Firewall error. 14 3E
0E010064 A remote copy set has been created specified by the Remote Copy Set Name
field. The initiator unit of the Remote Copy Set is specified by the Initiator
WWLID field.
90 00
0E020064 The remote copy set specified by the Remote Copy Set Name field has been
deleted by the operator.
90 00
0E030064 The logical unit specified by the Target WWLID has transitioned from the
normalizing or copying state to the normal state.
90 00
0E050064 The logical unit specified by the Target WWLID has been added to the remote
copy set specified by the Remote Copy Set Name field. The new target
member is now in the normalizing state.
90 00
0E068A01 The logical unit specified by the Target WWLID has been removed from the
remote copy set specified by the Remote Copy Set Name field.
90 8A
0E078A01 The logical unit specified by the Target WWLID has been removed from the
remote copy set specified by the Remote Copy Set Name field. The target
was removed by the operator.
90 8A
0E088864 The remote copy set specified by the Remote Copy Set Name field has just
had a membership change such that disaster tolerance failsafe error mode
can now be enabled if desired.
90 88
Table 5–15 Instance Codes (Sheet 21 of 24)
Instance
Code
Description Template
Repair
Action
Code