Specifications

Event Reporting: Templates and Codes 5–41
07040B0A Failover Control detected a transmit packet sequence number mismatch.
The controllers are out of synchronization with each other and are unable to
communicate. Note that in this instance, the Last Failure Code and Last
Failure Parameters fields are undefined.
05 0B
07050064 Failover Control received a Last Gasp message from the other controller. The
other controller is expected to restart itself within a given time period. If it
does not, it will be held reset with the “Kill” line.
05 00
07060C01
07070C01
Failover Control detected that both controllers are acting as
SCSI ID 6 . Since
ids are determined by hardware, it is unknown which controller is the real
SCSI ID 6 . Note that in this instance, the Last Failure Code and Last Failure
Parameters fields are undefined.
Applies to
SCSI ID 7 .
05 0C
07080B0A Failover Control was unable to send keepalive communication to the other
controller. It is assumed that the other controller is hung or not started. Note
that in this instance, the Last Failure Code and Last Failure Parameters fields
are undefined.
05 0B
07090064 Failover Control received a Code Load message from the other controller
indicating that a new program image is being written onto its PCMCIA card.
During this process, “keepalive” communication between controllers will not
occur. This controller will not “kill” the other controller for lack of
“keepalive” communication.
05 00
0C00370A Memory System Error Analysis is indicated in the information preserved
during a previous last failure but no error conditions are indicated in the
available Memory Controller registers. The Quadrant 0 Memory Controller
(CACHEA0) registers content is supplied.
14 37
0C103E02 The Quadrant 0 Memory Controller (CACHEA0) detected an Address Parity
error.
14 3E
0C113E02 The Quadrant 1 Memory Controller (CACHEA1) detected an Address Parity
error.
14 3E
0C123E02 The Quadrant 2 Memory Controller (CACHEB0) detected an Address Parity
error.
14 3E
0C133E02 The Quadrant 3 Memory Controller (CACHEB1) detected an Address Parity
error.
14 3E
Table 5–15 Instance Codes (Sheet 20 of 24)
Instance
Code
Description Template
Repair
Action
Code