Specifications

Event Reporting: Templates and Codes 5–33
03224002 Unexpected message. 51 40
03234002 Unexpected Tag message. 51 40
03244002 Channel busy. 51 40
03254002 Message Reject received on a valid message. 51 40
0326450A The disk device reported Vendor Unique SCSI Sense Data. 51 45
03270101 A disk related error code was reported which was unknown to the Fault
Management software. Note that in this instance, the Associated Additional
Sense Code and Associated Additional Sense Code Qualifier fields are
undefined.
41 01
0328450A The disk device reported standard SCSI Sense Data. 51 45
03324002 SCSI bus selection timeout. Passthrough 40
03330002 Device power on reset. Passthrough 00
03344002 Target assertion of REQ after WAIT DISCONNECT. Passthrough 40
03354002 During device initialization a Test Unit Ready command or a Read Capacity
command to the device failed.
Passthrough 40
03364002 During device initialization the device reported a deferred error. Passthrough 40
03374002 During device initialization the maximum number of errors for a data transfer
operation was exceeded.
Passthrough 40
03384002 Request Sense command to the device failed. Passthrough 40
03394002 Command timeout. Passthrough 40
033A4002 Disconnect timeout. Passthrough 40
033B4002 Unexpected bus phase. Passthrough 40
033C4002 The device unexpectedly disconnected from the SCSI bus. Passthrough 40
033D4002 Unexpected message. Passthrough 40
033E4002 Message Reject received on a valid message. Passthrough 40
033F0101 No command control structures available for passthrough device operation. Passthrough 01
03402002 Device port SCSI chip reported gross error. Passthrough 20
03410101 Miscellaneous SCSI Port Driver coding error. Passthrough 01
03420101 A passthrough device related internal error code was reported which is not
recognized by the Fault Management software.
Passthrough 01
Table 5–15 Instance Codes (Sheet 12 of 24)
Instance
Code
Description Template
Repair
Action
Code