Specifications
5–30 Compaq StorageWorks HSG80 Array Controller ACS Version 8.5 Maintenance and Service Guide
02864002 The controller has set the specified unit Data Safety Write Protected due to
an unrecoverable device failure which prevents writing cached data.
51 40
02872301 The CACHE backup battery has exceeded the maximum number of deep
discharges. Battery capacity may be below specified values. The Memory
Address field contains the starting physical address of the CACHEA0
memory.
12 23
02882301 The CACHE backup battery covering the mirror cache has exceeded the
maximum number of deep discharges. Battery capacity may be below
specified values. The Memory Address field contains the starting physical
address of the CACHEB1 memory.
12 23
02892301 The CACHE backup battery is near its end of life. The Memory Address field
contains the starting physical address of the CACHEA0 memory.
12 23
028A2301 The CACHE backup battery covering the mirror cache is near its end of life.
The Memory Address field contains the starting physical address of the
CACHEB1 memory.
12 23
028B3801
028C3801
Memory diagnostics performed during controller initialization detected that
the DIMM in
location 1
failed on the cache module. The failed DIMM should
be replaced as soon as possible. Control Structures have been moved to
secondary memory and are now unprotected against additional memory
failures. Note that in this instance, the Byte Count filed is undefined.
Applies to
location 2
.
14 38
028D0064 The device specified in the Device Locator field has been removed from the
SPARESET into the FAILEDSET. The new nominal number of members for the
SPARESET is specified in the Device Sense Data Information field.
51 00
028F8901
02908901
02918901
The host command failed because the remote copy set went failsafe locked
prior to command completion. The remote copy set is specified by the
Remote Copy Name filed. The Information field of the Device Sense Data
contains the block number of the first block in error.
51 89
02925D01 The device specified in the Device Locator field has been removed from the
SPARESET into the FAILEDSET; there are no devices left in the SPARESET.
The new nominal number of members for the SPARESET is specified in the
Device Sense Data Information field.
51 5D
Table 5–15 Instance Codes (Sheet 9 of 24)
Instance
Code
Description Template
Repair
Action
Code