Specifications

5–24 Compaq StorageWorks HSG80 Array Controller ACS Version 8.5 Maintenance and Service Guide
021B0064 Disk Bad Block Replacement attempt completed for a read of controller
metadata from a location outside the user data area of the disk. Note that
due to the way Bad Block Replacement is performed on SCSI disk drives,
information on the actual replacement blocks is not available to the
controller and is therefore not included in the event report.
41 00
021D0064 Unable to lock the other controller’s cache in a write-cache failover attempt.
Either a latent error could not be cleared on the cache or the other controller
did not release its cache. Note that in this instance, the Memory Address,
Byte Count, FX Chip register, Memory Controller register, and Diagnostic
register fields are undefined.
14 00
021E0064 The device specified in the Device Locator field has been added to the
RAIDset associated with the logical unit. The RAIDset is now in
Reconstructing state.
51 00
02280064 The device specified in the Device Locator field has been added to the
Mirrorset associated with the logical unit. The new Mirrorset member is now
in Copying state.
51 00
022C0064 The device specified in the Device Locator has transitioned from Copying or
Normalizing state to Normal state.
51 00
022E0064 The device specified in the Device Locator field has been converted to a
Mirrorset associated with the logical unit.
51 00
022F0064 The mirrored device specified in the Device Locator field has been converted
to a single device associated with the logical unit.
51 00
02383A01 The CACHEB0 Memory Controller, which resides on the other cache module
failed testing performed by the Cache Diagnostics. This is the mirrored
cache Memory Controller. The Memory Address field contains the starting
physical address of the CACHEB0 memory.
14 3A
02392201 Both the CACHEB0 Memory Controller and CACHEB1 Memory Controller,
which resides on the other cache module, failed testing performed by the
Cache Diagnostics. Data cannot be accessed in the primary cache or the
mirror cache. The Memory Address field contains the starting physical
address of the CACHEA0 memory.
14 22
Table 5–15 Instance Codes (Sheet 3 of 24)
Instance
Code
Description Template
Repair
Action
Code