Specifications

Event Reporting: Templates and Codes 5–15
Data Replication Manager Services Event Sense Response
(Template 90)
This section only applies to ACS version 8.5P. The HSG80 Data Replication Manager
Services software component reports events via the Data Replication Manager Services
Event Sense Data Response.
With Data Replication Manager, fault management events are reported using Template 90,
shown in Table 5–11. The error is signaled to all host systems on the logical unit
associated with the initiator unit that reported the error.
■ ASC and ASCQ codes (byte offsets 12 and 13) are detailed in the “ASC/ASCQ
Codes” section on page 5–17.
■ Instance codes (byte offsets 32–35) are detailed in the “Instance Codes” section on
page 5–20.
77–78 Reserved
79–82 Device Firmware Revision Level
83–98 Device Product ID
99–100 Reserved
101 Device Type
102–103 Reserved
104–121 Device Sense Data
122–159 Reserved
Table 5–10 Template 51—Disk Transfer Error Event Sense Data Response Format
(Continued)
↓ offset bit → 76543210
Table 5–11 Template 90—Data Replication Manager Services Event Sense Data
Response Format (ACS V8.5P only)
↓ offset bit → 76543210
0 Unused Error Code
1Unused
2 Unused Sense Key
3–6 Unused
7 Additional Sense Length
8–11 Unused
12 Additional Sense Code (ASC)