Specifications

Troubleshooting Resources 4–45
The following tables detail the remaining portions of the Fibre Channel Host Status
Display. Table 4–15 includes the labels that report the status of ports one and two, and
Table 4–16 describes the Link Error Counters.
SStatus:
N = online
F = offline
Table 4–15 Fibre Channel Host Status Display — Port Status
Field Label Description
Topology LOOP
OFFLNE
Current Status DOWN
LOOP
STNDBY
Current ID/ALPA Controller ID
TACHYON
®
Status This denotes the current state of the TACHYON or Fibre Channel control chip.
See “TACHYON Chip Status,” page 4-47, for more detail.
Queue Depth Queue depth shows the instantaneous number of commands at the
controller port.
Busy/QFull Rsp This field represents the total number of QFull/Busy responses sent by the
port.
Table 4–16 Fibre Channel Host Status Display — Link Error Counters
Field Label Description
Link Downs This field refers to the total number of link down/up transitions.
Soft Inits Soft initializations are the number of loop initialization caused by this port.
Hard Inits Hard initializations indicate the number of TACHYON chip resets.
Loss of Signals Loss of signals show the number of times the Frame Manager detected a
low-to-high transition on the lnk_unuse signal.
Table 4–14 Fibre Channel Host Status Display —
Known Hosts (Connections) (Continued)
Field Label Description