Specifications

4–42 Compaq StorageWorks HSG80 Array Controller ACS Version 8.5 Maintenance and Service Guide
A Availability of the unit:
a = available to “other controller”
d = disabled for servicing, offline
e = mounted for exclusive access by a user
f = media format error
i = inoperative
m = maintenance mode for diagnostic purposes
o = online. Host can access this unit through “this controller”.
r = rundown with the SET NORUN command
v = no volume mounted due to lack of media
x = online. Host can access this unit through “other controller”.
z=
currently not accessible to host due to a remote copy condition (ACS
V8.5P only)
= unknown availability
S Spindle state of the device:
^ = disk spinning at correct speed; tape loaded
> = disk spinning up; tape loading
< = disk spinning down; tape unloading
v = disk not spinning; tape unloaded
= unknown spindle state
W Write-protection state. For disk drives, a W in this column indicates that the device
is hardware write-protected. This column is blank for units that comprise other
kinds of devices.
C Caching state of the device:
a = read, write-back, and read-ahead caching enabled
b = read and write-back caching enabled
c = read and read-ahead caching enabled
p = read-ahead caching enabled
r = read caching only
= caching disabled
Table 4–13 Unit Status Columns (Continued)
Column Contents