Specifications

MSM800XEV/XEL / Previous Product Versions
www.kontron.com 89
10.5 Connectors and Jumpers of Previous Product Versions
10.5.1 Description of the Connectors for V1.0 /V1.1 /V1.2
Flat cable
44pin IDE is: IDT Terminal for Dual Row (2.00mm grid) and 1.00mm flat cable
All others are: IDT Terminal for Dual Row 0.1" (2.54mm grid) and 1.27mm flat cable
NC: not connected
Connector Structure Pin Remarks
J1 PC104+ 120 2mm
J2 VGA 2x5 2.54mm
J3 IDE 2x22 2mm
J4 JTAG-Port 4 2.54mm
J5 USB 1 4 2.54mm
J7 USB 2 4 2.54mm
J9 COM1 2x5 2.54mm
J10 COM2 2x5 2.54mm
J11 Keyboard, mouse, utility 2x5 2.54mm
J12 IrDA 4 2.54mm
J13 LPT1 2x13 2.54mm
J14 Floppy 26 FCC micro
J15 PC104 104 2.54mm
J16 Sound Audio I/O 2x15 2.00mm
J17 LAN / Battery 2x5 2.00mm
J19 Power, PM 2x4 2.54mm
U1 SODIMM 144 0.8mm
X1 LCD 2x22 2mm
X2 CompactFlash Holder
J2 VGA Monitor (CRT-signals)
J2 Header 15 pins HiDensity DSUB
10 Pin -M Signal Pin Signal
2 VGA red 1 Red
4 VGA green 2 Green
6 VGA blue 3 Blue
8 Horizontal Synch 13 H-Synch
9 Vertical Synch 14 V-Synch
5 + 11 Bridged
1 Ground 5, 6, 7, 8 Ground
3 NC
5 NC
7 Serial_Data
10 Serial_Clock
The VGA-CRT signals from J2 must be wired to a standard VGA HiDensity DSub connector (female):
The LCD signals must be wired panel specific.
Solder-side view of the female 15pin HiDSub
J3 IDE Interface