Specifications

viii Maintenance & Service Guide
Preface
Technician Notes
Å
WARNING: Only authorized technicians trained by Compaq should attempt to repair this
equipment. All troubleshooting and repair procedures are detailed to allow only
subassembly/module level repair. Because of the complexity of the individual boards and
subassemblies, no one should attempt to make repairs at the component level or to make
modifications to any printed wiring board. Improper repairs can create a safety hazard.
Any indications of component replacement or printed wiring board modifications may void
any warranty.
Å
WARNING: To reduce the risk of electric shock or damage to the equipment:
■ Do not disable the power grounding plug. The grounding plug is an important safety
feature.
■ Plug the power cord into a grounded (earthed) electrical outlet that is easily
accessible at all times.
■ Disconnect the power from the computer by unplugging the power cord either from
the electrical outlet or the computer.
Ä
CAUTION: To properly ventilate your system, you must provide at least 3 inches (7.6 cm)
of clearance at the front and back of the computer.
Locating Additional Information
The following documentation is available to support these products:
■ User Documentation
■ Technical Training Guides
■ Compaq Service Advisories and Bulletins
■ Compaq QuickFind
■ Technical Reference Guide
■ Compaq Quick Reference Guide
■ Compaq Service Reference Guide
■ Compaq Quick Troubleshooting Guide