Specifications

Maintenance & Service Guide 4–23
Removal & Replacement Procedures
4.15 Expansion Boards
✎
The W8000 supports 1.5V (typically 4X) AGP and AGP Pro cards only. Older
type AGP cards (3.3V) are not supported and will NOT fit in the AGP socket.
This workstation contains one AGP and six PCI sockets. The following illustration identifies
the physical location of these sockets.
Item Component
1 One 1.5V, AGP Pro Socket
2 Four 32-bit, 33-MHz PCI Sockets; primary bus
3 Two 64-bit, 66-MHz PCI Sockets; secondary bus