Specifications

4–8 Maintenance & Service Guide
Removal & Replacement Procedures
4.8 Shipping Bracket
1. Prepare the workstation for disassembly (Section 4.2), then place it on its side.
Ä
CAUTION: Before removing the access panel, ensure that the workstation is turned off,
and all cables are disconnected from the back of the workstation.
2. Remove the access panel (Section 4.5).
3. Remove the four screws that connect shipping bracket to the front of the chassis.
4. Remove the shipping bracket from the chassis.
To replace the shipping bracket, reverse the above procedure.