Specifications

Removal and Replacement Procedures
Maintenance and Service Guide 5–21
7. Lift up the back edge of the top cover
1
until the TouchPad
cable
2
prevents it from lifting any farther (Figure 5-14).
8. Release the ZIF connector
3
to which the TouchPad cable is
connected and disconnect the TouchPad cable
4
.
✎
The LED board cable is included in the Cable Kit (spare part
number 251639-001).
Figure 5-14. Removing the Top Cover
9. Remove the top cover.
Reverse the above procedure to install the top cover.