Specifications

Removal and Replacement Procedures
Maintenance and Service Guide 5–13
2. Remove the LED cover (Section 5.6).
3. Remove the microphone (Section 5.7).
4. Remove the keyboard (Section 5.8).
5. Release the ZIF connector
1
to which the LED board cable is
connected and disconnect the LED board cable
2
(Figure 5-8).
6. Remove the two black TM2 × 4 screws
3
that secure the
LED board to the top cover.
7. Remove the LED board
4
.
Figure 5-8. Removing the LED Board