Specifications

5–8 Maintenance and Service Guide
Removal and Replacement Procedures
6. Disconnect the modem/NIC cable from the modem/NIC
board
1
(Figure 5-4).
7. Slide the modem/NIC cable into the mini PCI compartment
until it clears the modem/NIC board
2
.
8. Spread the retaining tabs to release the modem/NIC
3
. The
board tilts up to a 45-degree angle.
9. Remove the modem/NIC by pulling it away from the
connector at a 45-degree angle.
Figure 5-4. Removing the Modem/Network Interface Card
Reverse the above procedure to install the modem/NIC.