System information

7–4 Hardware Guide
Communications Devices
Connecting a Network Cable
A network cable has an 8-pin RJ-45 connector at each end and
may contain noise suppression circuitry, which prevents
interference with TV and radio reception.
1. Orient the end of a network cable with noise suppression
circuitry 1 toward the RJ-45 jack on the notebook.
2. Plug the network cable into the RJ-45 jack 2.
3. Plug the other end of the cable into a network jack 3.
4. Start or restart the notebook.
Connecting a network cable
279360-002.book Page 4 Friday, December 13, 2002 2:11 PM