System information

Audio and Video
Hardware Guide 6–5
Using the S-Video-Out Jack
To transmit video signals through the S-video-out jack, you need
an S-video cable available from most television, VCR, or
electronics retailers.
To connect a video device to the S-video-out jack:
1. Plug either end of the S-video cable into the S-video-out jack
on the notebook 1.
2. Connect the other end of the cable to the video device as
instructed in the device documentation 2.
Connecting a device to the S-video-out jack on the notebook
✎
If the S-video-out jack on the notebook is not accessible while
the notebook is docked, you can connect the device to the
S-video-out jack on the optional Port Replicator.
279360-002.book Page 5 Friday, December 13, 2002 2:11 PM