System information

5–14 Hardware Guide
Removable Drives
Removing Optical Drive Media (with Power)
If power is available:
1. Turn on the notebook.
2. Press the release button 1 on the drive bezel to release the
media tray, then pull the tray out until it is fully extended 2.
3. Remove the disc from the tray 3 by gently pushing down on
the spindle while lifting the outer edges of the disc. Handle
the disc by the edges, not the flat surfaces. If the media tray is
not fully extended, tilt the disc as you remove it.
4. Close the media tray and place the disc in a protective case.
Removing a disc from an optical drive when power is
available
279360-002.book Page 14 Friday, December 13, 2002 2:11 PM