System information

5–12 Hardware Guide
Removable Drives
1. If the drive has a media tray, remove the media, then close
the tray.
2. Stop the drive as instructed in the preceding caution and close
the notebook display.
3. Turn the notebook bottom side up.
4. Slide the MultiBay release latch 1 toward the rear of
the notebook.
5. Pull the drive or drive assembly out of the MultiBay 2.
Removing a drive from the MultiBay
Ä
CAUTION: To protect the MultiBay opening when no device is
inside, insert the weight saver. This device prevents damage to
the MultiBay and does not increase notebook weight.
279360-002.book Page 12 Friday, December 13, 2002 2:11 PM