System information

4–4 Hardware Guide
Battery Packs
Replacing a MultiBay Battery Pack
Ä
CAUTION: When removing a MultiBay battery pack that is the only
power source available to the system, prevent loss of information by
initiating Hibernation or turning off the notebook before removing
the battery pack.
1. To replace a MultiBay battery pack, close the display and
turn the notebook bottom side up.
❏ To remove a battery pack, slide the MultiBay release
latch 1 on the bottom of the notebook and pull the
battery pack out of the MultiBay 2.
❏ To insert a battery pack, slide the battery pack into the
MultiBay until it is seated 3.
2. Turn the notebook right side up and open the display. If the
notebook is in Hibernation, slide the power switch to resume
operation.
Replacing a MultiBay battery pack
279360-002.book Page 4 Friday, December 13, 2002 2:11 PM