System information

Battery Packs
Hardware Guide 4–3
Replacing Battery Packs
Replacing a Primary Battery Pack
Ä
CAUTION: When removing a primary battery pack that is the only
power source available to the system, prevent loss of information by
initiating Hibernation or turning off the notebook before removing
the battery pack.
1. Close the display, then turn the notebook bottom side up 1.
2. Remove or insert the battery pack.
❏ To remove a battery pack, slide the battery release
latch 2. When the battery pack tilts upward, remove
it from the battery bay 3.
❏ To insert a battery pack, slide the battery pack into the
battery bay until it is seated 4.
3. Turn the notebook right side up and open the display. If the
notebook is in Hibernation, slide the power switch to resume
operation.
Replacing a primary battery pack
279360-002.book Page 3 Friday, December 13, 2002 2:11 PM