System information

Hardware Setup
Hardware Guide 2–3
3. Turn on the notebook by sliding and releasing the power
switch 1.
Turning on the notebook
When the notebook is turned on:
■ The power/standby light 2 turns on.
■ The battery pack in the battery bay begins to charge and the
battery light 3 turns on. The battery light remains on while
the battery pack is charging and turns off when the battery
pack is fully charged.
■ You are prompted to begin software setup.
✎
For more information on software setup, refer on this CD to the
Software Guide, “Software Setup” chapter.
279360-002.book Page 3 Friday, December 13, 2002 2:11 PM