Specifications

Removal and Replacement Procedures
Maintenance and Service Guide 5–9
b. Remove the PM2.5 × 2.5 hard drive retention screw
1
(Figure 5-4).
c. Separate the hard drive bezel
2
.
d. Use the bezel to slide the hard drive forward
3
to unseat
the hard drive connector from the system board.
e. Remove the hard drive.
Figure 5-4. Removing the Hard Drive
Reverse the preceding procedure to install the hard drive.
279362-001.book!!Page!9!!Monday,!July!8,!2002!!11:49!AM