Specifications

5–52 Maintenance and Service Guide
Removal and Replacement Procedures
3. Insert the tip of a flat-blade screwdriver into the slot on the
processor locking screw.
4. Turn the screwdriver counterclockwise
1
to release the
processor (Figure 5-36).
5. Remove the processor from the socket on the system
board
2
.
✎
When installing the processor, make sure the gold triangle
3
is in
the lower right corner.
Figure 5-36. Removing the Processor
Reverse the preceding procedure to replace the processor.
279362-001.book!!Page!52!!Monday,!July!8,!2002!!11:49!AM