Specifications

Removal and Replacement Procedures
Maintenance and Service Guide 5–45
✎
Steps 5 through 7 apply only to Evo Notebook N600c models.
5. Remove the PM2.0 × 4.0 screw
1
and PM2.5 × 5.0 screw
2
that secure the fan to the system board (Figure 5-31).
6. While holding the system board above the work surface, push
the left side of the fan up
3
from the bottom of the system
board.
7. When the left edge of the fan has cleared the system board,
slide the fan to the left
4
and out of the heat sink.
Figure 5-31. Removing the Fan on an Evo Notebook N600c
279362-001.book!!Page!45!!Monday,!July!8,!2002!!11:49!AM