Specifications

Removal and Replacement Procedures
Maintenance and Service Guide 5–37
✎
Steps 3 through 5 apply only to Evo Notebook N600c models.
3. Remove the tape that secures the modem cable to the system
board
1
(Figure 5-23).
4. Remove the two 7.0-mm bushing guides
2
on either side of
the docking connector that secure the system board to the
base enclosure.
5. Remove the three TM2.5 × 5.0 screws
3
that secure the
system board to the base enclosure.
Figure 5-23. Removing the System Board Screws and
Bushing Guides on an Evo Notebook N600c
279362-001.book!!Page!37!!Monday,!July!8,!2002!!11:49!AM