System information

Expanding Memory 13-3
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Writer: Karen Williams Saved by: Karen Williams Saved date: 05/10/99 9:59 AM
Part Number: 103542-001 File name: Ch13.doc
6. Remove the screw attaching the memory expansion
compartment cover to the computer.
■ If the computer shipped with a preinstalled memory
expansion board—
■ The memory expansion compartment cover is
attached with a tamper-resistant Torx T-10 memory
security screw.
■ Use the Torx T-10 screwdriver included with the
computer to remove and reinsert this screw.
■ If the computer shipped with an empty memory
expansion compartment—
■ The memory expansion compartment cover is attached
with a standard Torx T-8 screw, as shown below.
■ Use a standard Torx T-8 screwdriver to remove and
reinsert this screw.
7. Slide left, then lift and remove the memory expansion
compartment cover .