System information

13-2 Expanding Memory
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Writer: Karen Williams Saved by: Karen Williams Saved date: 05/10/99 9:59 AM
Part Number: 103542-001 File name: Ch13.doc
Inserting or Removing a
Memory Expansion Board
Removing the Memory Expansion Compartment Cover
!
WARNING: The memory compartment is the only user-accessible
internal compartment on the computer. All other areas that require a
tool to access should be opened only by a Compaq authorized
service provider.
!
WARNING: Failure to unplug the power cord and remove the battery
pack before installing a memory expansion board can damage the
equipment and expose you to the risk of electrical shock.
CAUTION: Electrostatic discharge (ESD) can damage electronic
components. Before beginning this procedure, ensure that you are
properly grounded. For more information, refer to Appendix C,
“Electrostatic Discharge.”
1. Shut down the computer.
NOTE: If you are unsure whether the computer is off or in
Hibernation, turn the computer on by sliding the power
switch, then shut it down
2. Disconnect all external devices connected to the computer.
3. Disconnect the power cord.
4. Remove all battery packs from the computer.
5. Turn the computer bottom side up on a flat surface with the
front panel facing you.