System information

9-2 Using an Internal Modem
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Writer: Karen Williams Saved by: Karen Williams Saved date: 04/21/99 1:56 PM
Part Number: 103542-001 File name: Ch09.doc
Selecting Communication Software
You can operate the modem with preinstalled or optional software.
To use preinstalled modem software, select StartÅPrograms.
Then,
■ In Windows 95 select AccessoriesÅFaxÅCompose
New Fax.
■ In Windows 98 or Windows NT 4.0 select RingCentral Fax.
Configuring the Modem
The settings you may be required to enter vary among
communication software applications. As you enter these settings,
the following information may be helpful.
Modem Model
■ If the computer is a network model—The modem model is
Compaq Global Mini PCI 10/100 LAN + 56k (V.90) Modem
by 3Com.
NOTE: A network computer model has an RJ-45 jack, includes
a network cable, and can be connected to a Local Area
Network.
■ If the computer is not a network model—The modem model
is Compaq Global Mini PCI 56k (V.90) Modem by 3Com.
To confirm that your modem is set up, select StartÅSettingsÅ
Control PanelÅModem.
■ If the modem is set up, your modem model displays on the
General tab.
■ If the modem is not set up, the Install New Modem setup
wizard displays. To set up your modem with this wizard:
1. On the first screen, select Other, then select Next.
2. On the second screen, select your modem or select Next to
prompt your operating system to detect the modem.
Other Recommended Settings
■ Modem initialization string—AT&F.
NOTE:
Newer initialization strings may be available from the
Compaq Internet site at http://www.compaq.com.
■ COM port settings—Refer to Appendix D.