System information

7-8 Securing the Computer
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Writer: Karen Williams Saved by: Karen Williams Saved date: 04/08/99 9:03 PM
Part Number: 103542-001 File name: Ch07.doc
Accessing a Protected Hard Drive
1. Ensure that the drive is inserted into the computer (not an
optional docking base).
2. When prompted for a DriveLock password, type the user or
master password, using the same keys you used to set the
password, then press
Enter. After 2 attempts to enter the
password correctly, you
must restart the computer to try again.
Changing a DriveLock Password or
Removing DriveLock Protection from a Drive
CAUTION: To prevent damage to the computer and the hard drive
and loss of work, shut down the computer before inserting or
removing a hard drive. Do not insert or remove a hard drive while the
computer is on, in Suspend (Standby), or in Hibernation. To ensure
that the computer is not in Hibernation, turn the computer on, then
shut it down.
1. Ensure that the protected hard drive is inserted into the
computer (not an optional docking base).
2. Turn on the computer, then press
F10 when the blinking cursor
appears upper-right on the screen.
■ To change the language, press F2.
■ For navigation instructions, press F1.
3. Select SecurityÅDriveLock passwords, then press Enter.
4. Select the location of the hard drive, then press F10.
■ To change a user or master password—In the field of the
password you want to change, type the current password in
the Old Password field, type the new password in the New
Password and Verify New Password fields, then press
F10.
■ To remove DriveLock protection from the drive—
Toggle the protection field to disable and press
F10. Then
type your master password in the Old Password field and
press
F10.
5. To save your changes, then exit Computer Setup and restart
the computer, select FileÅSave Changes and Exit.
6. When prompted to confirm your action, press
F10.