System information

4-6 Inserting, Removing, or Storing a Battery Pack
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Writer: Karen Williams Saved by: Karen Williams Saved date: 04/16/99 9:46 AM
Part Number: 103542-001 File name: Ch04.doc
Removing a Dual-MultiBay Battery Pack from
the Dual MultiBay
CAUTION: To prevent loss of work while replacing a battery pack
that is the only power source available to the system:
■ Initiate Suspend (Standby) before removing the discharged
battery pack.
■ Insert the replacement battery pack within 5 minutes after
removing the discharged battery pack.
1. If the computer is on, the battery bay does not contain a
charged battery pack, and the system is not connected to
external power, initiate Suspend (Standby) by pressing the
suspend button.
NOTE: Extensive drive activity may delay Suspend (Standby).
2. Tilt the computer up , then slide the front MultiBay release
latch toward the rear of the computer while pulling on the
center lower edge of the battery pack .